Home >> Car Lifts >> Inground Lifts >> AV1020series >> Specifications

AV1020series Inground Car Lift » Specifications

The specifications for inground car lifts can vary, so you should make sure factors like lift capacity, overall width, speed or rise and required ceiling height match your qualifications. Below is a table comparing the specifications of the AV1020 series, including the AV1020WV and the AV1020AP.

Model Number
AV1020WV AV1020MP9

Lift Capacity*

10,000 lbs. (4535kg)*
9,000 lbs. (4082kg)


73" (1854mm)
A Rise Height
79-1/8" (2010mm)¹
75-3/4" (1924mm)²
B Width Overall
97" (2464mm)
31-1/2" / 79-3/4" (800 / 2026mm)
C Drive-Thru Clearance
87" (2210mm)
D Reach (Arm Minimum)
19-5/8" (498mm)
W 31-1/2" x L 26-1/2
(800mm x 673mm)
E Reach (Arm Maximum)
42" (1067mm)
W 79-1/2" x L 80"
(2019mm x 2032mm)
F Rubber Pad Adapter (Minimum)
3-7/8" (98mm)³
2-3/4" (60mm)
G Rubber Pad Adapter (Maximum)
Capacity (Per Arm/Pad)
2500 lbs. (1134kg)
(per arm)
2250 lbs. (1021kg)
(per pad)
Speed of Rise
Approx. 45 seconds
Air Required
200 psi
200 psi
Ceiling Height Required
(2134mm) plus height of tallest vehicle
Shipping Weight
2420 lbs. (1098 kg)
2420 lbs. (1098 kg)

* 10,000 lb. lifting capacity with 200psi.
9,000 lb lifting capacity with 180 psi. Beam lifting capacity is 9,000 lbs.
¹ Rise height is measured with superstructure in highest position.
²Rise height is measured with superstructure in highest position with rubber spotting block.
³Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm).
Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

AV1020WV Inground Lifts
Challenger Lifts on Facebook Follow Challenger Lifts on Twitter Challenger Pictures on Flickr Challenger Pictures on Flickr

Leading Car Lift Innovation for over 28 years