CL10series Two Post Lift » Specifications

Model	CL10	CL10-2	CL10-3	CL10V3	CL10V3-2	CL10V3-3	CL10V3-DPC	CL10V3-2-DPC	CL10V3-3-DPC
Lift Capacity*	10,000 lbs. (4535kg)
A Rise Height¹	75-1/8" (1908mm)
B Column Height	11' 8" (3556mm)	13' 8" (4166mm)	14' 8" (4470mm)	11' 8" (3556mm)	13' 8" (4166mm)	14' 8" (4470mm)	11' 8" (3556mm)	13' 8" (4166mm)	14' 8" (4470mm)
C Cylinder Overall (Full Stroke)	11' 11" (3632mm)
D Adjustable Width Overall	11' 6-1/2" / 11' 11" (3518mm / 3632mm)
E Drive-Thru Clearance²	100-1/2" / 105" (2553mm / 2667mm)
F Floor to Overhead Switch²	11' 2-1/2" (3416mm)	13' 2-1/2" (4026mm)	14' 2-1/2" (4331mm)	11' 2-1/2" (3416mm)	13' 2-1/2" (4026mm)	14' 2-1/2" (4331mm)	11' 2-1/2" (3416mm)	13' 2-1/2" (4026mm)	14' 2-1/2" (4331mm)
G Front Arm Reach (Min/Max)	Min. 27" / Max. 41" (686mm / 1041mm)			Min. 19-13/16" / Max. 42" (956mm / 1524mm)
H Rear Arm Reach (Min/Max)	Min. 42" / Max. 59" (1067mm / 1499mm)			Min. 37-5/8" / Max. 60" (956mm / 1524mm)
I Screw Pad Height³	Min. 3-7/8" / Max. 6-1/2" (98mm / 161mm)
J Inside Columns²	110" / 114-1/2" (2794mm / 2908mm)
K Low Lock Height	12" (305mm)
Motor	2HP
Voltage	208v - 230v (Single Phase Standard)⁴
Speed of Rise	48 seconds
Max. Load per Arm	2,500 lbs. (1134kg)
Ceiling Height Required	12' (3658mm)	13' 9" (4191mm)	14' 9" (4496mm)	12' (3658mm)	13' 9" (4191mm)	14' 9" (4496mm)	12' (3658mm)	13' 9" (4191mm)	14' 9" (4496mm)
Shipping Weight	1865 lbs. (846 kg)	1991 lbs. (903 kg)	2054 lbs. (932 kg)	1835 lbs. (832 kg)	1961 lbs. (889 kg)	2025 lbs. (919 kg)	1950 lbs. (885 kg)	2125 lbs. (964 kg)	2045 lbs. (928 kg)

*Lift capacity ratings are based on loads equally distributed on all four arms. 1 Rise Height is measured with adjustable screw pads in highest position. 2 Specifications are listed with lift at maximum width and/or height settings. 3 Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm). 4 Optional 3 phase electrical also available. Specify at time of order. Standard lift colors are Red and Blue. Optional colors available.
Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

Find a Rep near you!

Outside the US? Click Here
Become a Distributor or Installer

Join our mailing list