Home >> Car Lifts >> Two Post Auto Lifts >> CL12 >> Specifications

CL12 Two Post Lift » Specifications


In the table below, view detailed specifications for each of the CL12 2 post lifts, including the CL12, CL12-1 and the CL12-2. Compare overall height, shipping weight, required ceiling height and other specs side-by-side. If you have questions about the CL12 heavy duty lift, contact us today.


Model Number
CL12 CL12-1 CL12-2/th>

Lift Capacity*

12,000 lbs. (5443kg)
A Rise Height1
84-3/4" (2153mm)
B Height Overall
13' 8"
(4166mm)
14' 8"
(4470mm)
15' 8"
(4775mm)
C Width Overall
11' 10" (3607mm)
D Drive-Thru Clearance
103-1/2" (2629mm)
E Floor to Overhead Switch
157"
(3988mm)
169"
(4293mm)
181"
(4597mm)
F Arm Reach (Min)
27 1-2" (700mm)
G Arm Reach (Max)
59" (1500mm)
H Adj. Adapter Height2
5" / 6-5/8"
(127mm / 168mm)
I Adj. Adapter Height2
(with medium extensions)
8" / 9-5/8"
(203mm / 244mm)
J Adj. Adapter Height2
(with high extensions)
11" / 12-5/8"
(279mm / 320mm)
K Inside Columns
114-1/2" (2908mm)
Air Supply Required
85 - 115 psi
Motor
2HP
Voltage (Single Phase Standard)3
208v - 230v
Speed of Rise
60 seconds
Ceiling Height Required
13' 9"
(4191mm)
14' 9"
(4496mm)
15' 9"
(4801mm)
Shipping Weight
2025 lbs. (919 kg)
2045 lbs. (928 kg)
2125 lbs. (964 kg)

*Lift capacity ratings are based on loads equally distributed on all four arms.  1 Rise Height is measured with high extension.  2 Medium and high auxiliary adapter extensions are standard.  3Optional 3 phase electrical also available. Specify at time of order.
Standard lift colors are Red and Blue. Optional colors available.
Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.


CL12 Two Post Lifts
Challenger Lifts on Facebook Follow Challenger Lifts on Twitter Challenger Pictures on Flickr Challenger Pictures on Flickr

Leading Car Lift Innovation for over 28 years