CLFP9 Two Post Lift » Specifications

Model Number	CLFP9
Lift Capacity*	9,000 lbs. (4082kg)
A Rise Height¹	78-1/8" (1984mm)
B Column Height	10' 7/8" (3070mm)
C Overall Width	11' 5-1/2" (3493mm)
D Drive-Thru Clearance	98-3/16" (2494mm)
E Front Arm Reach	24-1/2" / 44-1/2" (623mm / 1131mm)
F Rear Arm Reach	24-1/2" / 44-1/2" (623mm / 1131mm)
G Screw Pad Height²	Adj. 4" / 5-7/8" (102mm / 149mm)
H Inside of Columns	109" (2769mm)
Motor	2HP, Single Phase, 60Hz
Voltage	208v - 230v
Speed of Rise	60 seconds
Max. Load per Arm	2,250 lbs. (1020kg)
Ceiling Height Required	10' 1-7/8" (3096mm)
Shipping Weight	1925 lbs. (873 kg)

*Lift capacity ratings are based on loads equally distributed on all four arms. 1 Rise Height is measured with adjustable screw pads in highest position. 2 Specifications are listed without rubber pad, for measurements with rubber pad add 1/4" (6mm)
Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.

Find a Rep near you!

Outside the US? Click Here
Become a Distributor or Installer

Join our mailing list