Home >> Car Lifts >> Two Post Auto Lifts >> E12 >> Specifications

E12 2 Post Heavy Duty Lift » Specifications


How do you know if the E12 heavy duty lifts are right for you? Take a look at the below specifications chart for our 2 post heavy duty lift. The chart compares the specifications of our E12 and E12EH2 heavy duty lifts so you can choose the one that best meets your needs.


Model Number
E12 with E12EH2**
column height extensions

Lift Capacity*

12,000 lbs. (5443kg)
A Rise Height
77-3/4" (1984mm)
B Adj. Column Height
13' 10 or 14' 7"
(4216mm or 4445mm)
15' 10 or 16' 7"
(4826mm or 5055mm)
C Overall Width
11' 7-3/4" (3550mm)
D Drive-Thru Clearance
103" (2616mm)
E Floor to Overhead Switch
13' 3-1/2" or 14' 1/2"
(4051mm or 4280mm)
15' 3-1/2" or 16' 1/2"
(4661mm or 4890mm)
F Arm Reach (Min.)
35-3/4" (910mm)
G Arm Reach (Max.)
54-1/2" (1386mm)
H Adj. Screw Pad Height
5-1/4" / 7-1/4"
(133mm / 184mm)
Adj. Adapter Height
(with 3" Extensions & Screw Pad)
8-1/4" / 10-1/4"
(210mm - 260mm)
Adj. Adapter Height
(with 6" Extensions & Screw Pad)
11-1/4" / 13-1/4"
(286mm - 337mm)
I Inside of Columns
115" (2921mm)
Motor
2HP, Single Phase, 60Hz
Voltage
208v - 230v
Speed of Rise
66 seconds
Max. Load per Arm
3,000 lbs. (1361kg)
Ceiling Height Required
13' 11" or 14' 8"
(4242mm or 4470mm)
15' 11" or 16' 8"
(4851mm or 5080mm)
Shipping Dimensions
Shipping Weight
2000 lbs. (907 kg)
2310 lbs. (1048 kg)
Length
135" (3429 mm)
135" (3429 mm)
Width
25" (635 mm)
25" (635 mm)
Height
28" (907 mm)
40" (1016 mm)


Questions about our heavy duty lifts? Contact us today.


*Lift capacity ratings are based on loads equally distributed on all four arms.
Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.


E12 Two Post Lifts
Challenger Lifts on Facebook Follow Challenger Lifts on Twitter Challenger Pictures on Flickr Challenger Pictures on Flickr

Leading Car Lift Innovation for over 28 years