Q4 Two Post Lift ยป Specifications
Model Number |
Q4 | with Q4EH2** column height extensions |
|---|---|---|
Lift Capacity* |
4,000 kgs |
|
A Rise Height1 |
2000mm (78-3/4") |
|
B Overall Height |
3747mm or 3493mm (12' 3-1/2" or 11' 5-1/2") |
4356mm or 4102mm (14' 3-1/2" or 13' 5-1/2") |
C Overall Width |
3347mm (10' 11-3/4") |
|
D Drive-Thru Clearance |
2499mm (98-3/8") |
|
E Floor to Overhead Switch |
3568mm or 3314mm (11' 8-1/2" or 10' 10-1/2") |
4178mm or 3942mm (13' 8-1/2" or 12' 10-1/2") |
F Front Arm Reach |
553mm / 998mm (21-3/4" / 39-1/4") |
|
G Rear Arm Reach |
971mm / 1407mm (38-1/4" / 55-3/8") |
|
H Screw Pad Height2 |
105mm / 184mm (4-1/8" / 7-1/4") |
|
I Inside of Columns |
2800mm (110-1/4") |
|
Motor |
2.2 kw |
|
Voltage |
50Hz - 230v |
|
Speed of Rise |
50 seconds |
|
Max. Load per Arm |
1000 kgs |
|
Ceiling Height Required3 |
3785mm (12' 5") |
4359mm (14' 4-1/2") |
*Lift capacity ratings are based on loads equally distributed on all four arms. **Specifications are for Lift Model Q4 with optional accessory Q4EH2 column height extensions (Must order Q4 and Q4EH2 for new lift purchase or Q4EH2 for addition of 610mm height extension to an existing lift). 1 Rise Height is measured with telescoping screw pads in highest position. 2 Specifications are listed without rubber pad, for measurements with rubber pad add 6mm (1/4"). 3 Ceiling Height requirement may exceed 3785mm or 4268mm if column shimming is necessary.
Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.
